Safety of Construction Hoists

Before leaving the factory, the hoist has been inspected, adjusted, and tested, and all technical indicators meet the design requirements. When in use, it is only necessary to connect the power supply; the hydraulic and electrical systems do not need adjustment. The following points must be noted during use.

The hoist must be placed on solid and level ground to prevent tipping during operation. Press the "Up" or "Down" button to raise or lower the work platform. If the work platform does not move, stop the machine immediately and check it. If the electric hoist is found to have excessively high working pressure or abnormal noise, shut it down immediately and check it.

To avoid serious damage to the machinery, regularly check the working condition of the pins every month. If pins or screws are found to be loose, be sure to tighten them to prevent accidents caused by pins falling off. Hydraulic oil should be kept clean and replaced every 6 months. When repairing, maintaining, and cleaning the hoist, be sure to prop up the safety support rod.